[Excellent Belt Hammer Machine] At the end of 2020, Sany 550H large excavator with Aidi 200 crushing hammer, 8200 hours of earth crushing, one machine dual-use

A Sany SY550H large excavator in top-quality condition, about 55 tons, was built at the end of 2020 and has a real life expectancy of 8200 hours. It has an Aidi 200 crushing hammer and hammer tube that has been laid out. It can both dry earth and crush. It is equipped with an Isuzu 6WG1 engine. The three parts are dry and the cab is equipped with a protective net. It is now sold in good faith. It supports on-site inspection and can be launched nationwide, and can be exported from the Middle East and Africa.

[Figure 1] Real shot on the right side of the whole machine: SY550H body logo is clear, the boom 31 mark is complete, and the original paint panel and track are intact.

[Figure 2] Real shot at the rear of the fuselage: Sany Sany is complete with major standards, with only traces of normal use, and no collision or cracking.

Core selling points:

1. Sany 55-ton excavation: SY550H has sufficient tonnage, great strength, high efficiency, and easy to carry heavy earthworks and crush.

2. Actual table 8200 hours: The number of hours is true and can be checked on site. The use intensity is reasonable and the residual value is high.

3. Bring Aidi 200 crushing hammer: The original Aidi 200 hammer and hammer tube have been laid out. Buy it back and use it for earth-crushing machines, so there is no need to modify it.

4. Isuzu 6WG1 Power: The engine is durable and has strong explosive power. Overseas parts are easy to find and maintain.

5. The cab is equipped with a protective net: the front stop and top are protected in place, making it safer to break dry, and the glass interior is intact.

6. The three major parts are dry: the engine, hydraulic pump, rotary, and main control valve have no obvious leakage, no major repair history, and the movements are coordinated.

7. The chassis is complete: the track shoes, chains, and supporting wheels are normally worn, and the walking is strong and not loose.

[Figure 3] Real shot of the cab side of the whole machine: SY550H logo, cab, walking platform and crawler are complete and fully configured.

[Figure 4] Real shot of the engine compartment: The original Isuzu 6WG1 engine has a regular cabin without major repairs. It starts normally and runs smoothly.

[Figure 5] Real shot of the hydraulic main pump cabin: The main pump, filter elements, and pipelines are arranged in a regular manner, with no obvious leakage, and the hydraulic system is stable.

[Figure 6] Main control valve and swing tilt: The valve block, swing motor, and hydraulic pipeline are orderly, the compound actions are coordinated, and the swing is stable.

[Figure 7] Real shot on the left front side of the whole machine: the cab protective net, boom and chassis are complete, the structural parts are free from hard injuries, and the protection against breakage is in place.

[Figure 8] Close-up of track links: The pin sleeves, chain links, and bolts are in good condition, are normally worn, not loose, and are powerful in walking.

[Figure 9] Bow down of the boom pipeline: The breaker hammer pipeline has been laid out and fixed firmly. It can be operated with the hammer, and the pipeline is neat and free of leakage.

Brief parameters (subject to the on-site nameplate):

Model: Sany SY 550H

Year: End of 2020

Working weight: approximately 55 tons

Engine: Isuzu 6 WG1

Working hours: 8200 hours

Attached: Eddie 200 crushing hammer (hammer tube has been laid out)

Bucket capacity: about 2.8 cubic meters (subject to actual configuration)

Working conditions: Earthwork and crushing can be used

Status: In stock, machine inspection, shipment, and export

Purchase and export: Support on-site machine viewing and video inspection; you can issue a full set of export documents, arrange miscellaneous items or container loading, customs declaration and sea transportation, and can be reached in the Middle East, Africa and other regions.

Price: Sell it in good faith, give you a real price in private chat, and colleagues are also welcome to adjust the machine.

Contact information:

WeChat: Xunjibao_com

Tel: 13013044111

Email: mryh1688@gmail.com

Facebook：https://www.facebook.com/share/1HPbUXAHtB/

Douyin: equipmach

TikTok：https://tiktok.com/@xunjibao